How do I configure a PC with Legacy BIOS to PXE Network boot?
To configure a PC with a Legacy BIOS to PXE Network Boot:
1. Open the BIOS Setup / Configuration
2. Enable the Network Boot ROM or Network PXE.
BIOS menu / options vary per vendor and model. Look for Boot Tab, Advanced Configuration or Onboard Devices and select ENABLE next to the LAN / Network OpRom or Network PXE or Network Boot.
3. If you notice any of the following, be sure to DISABLE
- Fast Boot
- Quiet Boot
- Windows 8.1 Mode
- Secure Boot
- Platform Trust Technology (PTT) may also need to be disabled in order to disable Secure Boot.
4. Change the boot sequence. After enabling the Network Boot, be sure to change the boot sequence so that Network boot is the first priority.
If you don't see any network boot options in the boot sequence menu after enabling the network boot option, you will have to first save and exit the BIOS then restart the PC and enter the BIOS again. The new network boot option should now be shown in the boot sequence menu.
5. Save and exit the BIOS.
6. The PC should now PXE Network boot to the QuickCAST Server.