How do I create my own burn-in scripts Legacy Mode (USB Version)?


How do I create my own burn-in scripts Legacy Mode (USB Version)?



The Burn-In function allows you to run QuickTech Premium tests automatically to accommodate more lengthy testing sessions where you want to Burn-In or Age new or repaired components or new system builds. Using the Burn-In mode also saves you time in executing multiple tests since you do not have to access individual menus and select each particular test you want to run.

Burn-In testing can also be used to isolate random or intermittent failures which may only surface during extended testing sessions.

The following is a step-by-step process to create a Burn-In Script:

    1. Select Burn-In and press Enter.
    2. Select New and press Enter

Note: The first items to add in a Burn-In script should be the Display, Test Activity, and Error Handling options.

    1. Select Display and press enter
    2. Select either Script or Test

Script - This will display the Script and pass/fail indicator of each test. This will not notify the user of the status during each test.  This is the most basic mode.

Test - This shows the details of each test.  It is similar to running the tests in Diagnostic Mode. As the Script moves from test to test, the test name is displayed for one second before the test details are displayed.

    1. Select Activity and press Enter.
    2. Select either Wind Mill or Keyboard LED’s

Wind Mill - Shows a spinning cursor next to each test as it is running.  This informs you which test is in progress and that the test has not hung up. It will also display the pass/fail results.  If the cursor bar is green, the test passed. If it is red, the test failed.

Keyboard LED - It will light the Num Lock, Caps Lock and Scroll Lock LED’s in sequence to let you know that the test is running.  If the LED’s hang or fail to light, it is an indication that the software has hung or it is not running.

  1. (Optional) Select on Error and press Enter.
  2. Select an option
  3. Select Test and press Enter.
  4. Select the Number of Times or Number of Loops to run this test item
  5. Select Test Category
  6. Select Test Item
  7. Repeat until you have selected all the desired tests.
  8. Select Results
  9. Select OEM Save
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.